Closed System Treatment

 

System Cleaner

System Cleaner

Video Overview

Description

A heavy-duty liquid cleaner specifically formulated to emulsify and clean equipment surfaces fouled by cutting oils, grease, lubricants, corrosion products and other debris.

With newly constructed boilers, heat exchangers, hot and chilled water systems, or process cooling systems, lubricants and internal debris must be removed before startup. In addition, older equipment and systems can become fouled with corrosion products and will require cleaning. System Cleaner is a powerful alkaline detergent specially formulated to penetrate and remove oils, grease, and other types of dirt and corrosion products. In addition to removing lubricants and dirt before startup of new systems, System Cleaner fully preps metal surfaces for effective corrosion control by inhibitors utilized in products such as Ty-Ion B20, Freez-Kontr’l or Freez-Therm and others.

Packaging Size Part Number
5 gallon pail 4370-08

Directions

This product must be used in accordance to the following directions by HVACR professionals only.

  1. Flush system and fill with fresh water, leaving sufficient room for required cleaner.
    a) Use 1 gallon of product for every 75 gallons of system water.
  2. Circulate cleaning solution for approximately 8 hours. Be sure to:
    a) Vent system from point of highest elevation in order to avoid gas binding.
    b) If possible, heat cleaning solution to 120 - 130ºF.
  3. Flush system continually until flush water runs clear. Add fresh water.
  4. Add recommended corrosion protection product (i.e. Ty-Ion® B20, Freez-Kontr’l®, etc.)

Literature Downloads

Download the product bulletin and other relevant literature here.

Labels

Download a low resolution file of the product label here.

SDS Information

Read and understand the product’s Safety Data Sheet for precautionary and first aid information.

Videos

system cleaner