Condenser Cleaners


Alka-Brite Plus

Alka-Brite Plus

Video Overview



A non-acid, alkaline-based product for brightening and cleaning air-cooled condensers. It contains the best available detergents and surfactants to quickly penetrate and remove greasy soils and oxidation and its foaming helps lift greasy soils out of the coil, leaving equipment clean and bright.

For cleaning and brightening air cooled condensers, permanent filters and other finned heating and cooling coils. It is not recommended for indoor use and it should not be used on evaporator coils.

Packaging Size Part Number
1 gallon bottle 4120-08
2.5 gallon pail 4120-05
55 gallon drum 4120-01


This product must be used in accordance to the following directions by HVACR professionals only.

  1. Goggles, gloves and other protective garments should be worn when using this product. System should be shut off.
  2. Apply with any of the durable, low pressure plastic sprayers listed on the back side of this bulletin.
  3. Prepare cleaning solution by mixing one part Alka-Brite with three to four parts of water. Add the water to the sprayer first, then add the cleaner. (If using the No. 200P Sprayer, you will add the Alka-Brite first.)
  4. Spray cleaning solution onto dirty coils or surfaces and allow it to remain in contact with the dirty surfaces for 5-10 minutes.
  5. Rinse thoroughly with water, and apply a coating of Cal-Shield, the coil protector based upon DuPont’s Teflon® surface protector. Then, return system to service.
  6. Rinse out sprayer as well as its spraying wand and nozzle.

Literature Downloads

Download the product bulletin and other relevant literature here.


Download a low resolution file of the product label here.

SDS Information

Read and understand the product’s Safety Data Sheet for precautionary and first aid information.


alka-brite plus; alka brite plus; AlkaBritePlus; Alka-Bright Plus; alka-bright plus; alka brite +; alka bright +