A heavy duty detergent containing surfactants, grease solvents, alkaline cleaners, corrosion inhibitors and water conditioners. Ideal for cleaning window units as well as small evaporator coils, air cooled condenser coils, metal filters, fan blades, walk-ins, reach-ins, coolers, freezers, microchannels, A/C systems, and other surfaces soiled with greasy dust and dirt. When used as directed, CalClean will not corrode any metal.
CalClean is acceptable for use as a general cleaner on surfaces in and around food processing areas, where its use is not intended for direct or indirect food contact. Cover or remove all food products around the area where the product will be used. Food preparation surfaces cleaned by this product must be rinsed with potable water prior to preparing food.
Packaging Size Part Number
20 ounce can 4081-75
This product must be used in accordance to the following directions by HVACR professionals only.
Warm the can to room temperature. If necessary, submerge in warm water (Maximum 90ºF) for 5 minutes. Open and shut the valve completely. Keep your fingertip out of the spray so as not to form droplets. Spray area to be cleaned until all grease and dirt are thoroughly wet. Wait a few minutes for soaking and then wipe clean with rag or flush with water.
Download the product bulletin and other relevant literature here.
Download a low resolution file of the product label here.
Read and understand the product’s Safety Data Sheet for precautionary and first aid information.