Products: Cooling Tower Water Treatment

Humidi-Treat

Humidi-Treat is designed for humidifiers using up to 25 gallons per day, and will inhibit scale for one season. Install Humidi-Treat on the water line that supplies water directly to the humidifier.

Application

• Clean pad or install new pad before installing Humidi-Treat.
• For best results humidifier should have a daily dump of water from the sump to diminish scale forming minerals.
• Install a new Humidi-Treat before each heating season.

Installation Steps:

1. Shut off water.
2. Disconnect existing filter or cut water line where filter is to be installed.
3. Install water line directly into the John Guest fitting at each end of the Humidi-Treat cartridge.
4. Insure proper direction of water flow and connect inlet and outlet. USE TWO WRENCHES.
5. Carefully turn on the water and check for leaks.
6. Check the filter after approximately 8 hours for slight leaks not visible during initial installation.

Packaging

Product Literature Downloads:

Humidi-Treat- Product Flyer

Back to top >