Products: Feeding Equipment

No. 4 Micromet Feeder

Designed to introduce Micromet Treatment for controlling lime scale formation, corrosion or red iron staining in well-water systems. Holds four pounds of Micromet and can treat up to 400 gallons of water per day for corrosion and red iron water and up to 800 gallons per day when lime scale is the problem. It can also be used to feed a slower dissolving phosphate, 6R Micromet, into large coffee urns or ice machine as well as other water systems using up to 800 gallons of water (6600 lbs. of ice) per day.

Special Features

• Can handle flow rates up to 10 gpm.
• Equipped with 3/4" FPT connections.
• Built-in pressure relief valve.
• Low pressure drop - 2.5 psi at 5 gpm and 6 psi at 10 gpm.
• No tools required for recharging.
• Holds up to 4 lbs. (64 ounces) of Micromet Crystals or 6R Micromet.

Where to install the feeder

To prevent red iron water with Micromet Crystals, the Feeder should be installed before the pressure tank. On deep well pump installations there should be a check valve in the main line between the Feeder and the pump. To inhibit lime scale or control corrosion the Feeder should be installed on the cold water inlet line to the equipment to be treated. If put before a water heater, place far enough away so no hot water will back up into Feeder. Flow should be up through Feeder.

Packaging

Product Literature Downloads:

No. 4 Micromet Feeder - Instruction Bulletin

Back to top >