Refrigeration & VP Oils
Vacuum Pump Oil
Nu-Calgon Vacuum Pump Oil is a quality blend of high-grade lubricants, providing for oil that performs at the deepest vacuum. It lubricates to minimize wear and provide surface protection, and its high viscosity index assures adequate lubrication at high and low pressures. In addition, its broad package line guarantees the right package size for all levels of service activity, from the service professional handling only an occasional evacuation to the one conducting several every day.
Packaging Size Part Number
1 Pint Bottle 4383-34
1 Quart Bottle 4383-24
1 Gallon Bottle 4383-07
This product must be used in accordance to the following directions by HVACR professionals only.
Change the oil in the vacuum pump after every use of the pump.
During pump operation, moisture as well as other contaminants like acids, vapors, etc. are easily absorbed into the vacuum pump oil. If the vacuum pump oil is not changed after absorbing such contaminants, it will become dirty and keep the pump from performing at design capacity (i.e., it will not reach its ultimate vacuum). Moreover, this will result in longer pump down time as well as excessive wear on integral parts of the pump.
Drain used oil from pump. If it appears exceptionally dirty or sludged, power flush the pump according to the pump manufacturer’s recommendations; power flushing helps to cleanse the pump of the old contaminated oil residuals. After power flushing, refill pump with fresh, new vacuum pump oil. View oil through sightglass and test the unit’s ultimate vacuum. If oil appears dirty or if vacuum is unsatisfactory, change oil again.
See back side of bulletin for oil changing capacities for some of the more frequently used vacuum pumps.
Download the product bulletin and other relevant literature here.
Download a low resolution file of the product label here.
Read and understand the product’s Safety Data Sheet for precautionary and first aid information.